Southern Snow ® Ice Molds and Bottle Rack



  1. BOTTLE RACK holds 12 syrup bottles at four heights. Dimensions are 14 ½”' x 10 ½" x 16". The height with syrup bottles is 25".


Bottle Rack

  1. RECTANGLE ICE MOLD for making ice to use in the Southern Snow® Machine. The approximate inside mold dimensions are 14 ½" x 5 ½" x 6 ½". Their is a ¾" lip around the top of the mold. Pour 1 ½ gallons of water into the mold or water to the height of 4 ½". This will produce a 12 ½ pound block. Ice will have less cracks or splitting if the freezer is set at plus 5 degrees rather than minus 5 degrees or below. These ice molds can supplement your ice needs. Approximately 18 twelve ounce snowballs are made from one block. These blocks may take several days to freeze in a normal freezer.


Rectangle Ice Mold

  1. ROUND ICE MOLD for making ice to use in the Hatsuyuki HF500E, Swan SI-100E and Fujimarca MC-709SE. The mold dimensions are 8" dia. x 8 ¼" height. Pour one gallon of water into the mold or water to the height of 5 ¾". This will produce an 8 1/3-pound block. Ice will have less cracks or splitting if the freezer is set at plus 5 degrees rather than minus 5 degrees or below. These ice molds can supplement your ice needs. Approximately 8 twelve ounce snowballs are made from one block. These blocks may take several days to freeze in a normal freezer.


Round Ice Mold

  1. PLASTIC QUART SQUEEZE BOTTLE is a plastic bottle with built in measuring reservoir used to measure one ounce of flavor concentrate for a quart serving bottle of syrup. Each bottle includes a quart cap and open and close polytop.


Plastic Quart Squeeze Bottle
Supplies Information

Southern Snow ships 99% of orders complete with no back orders, within 24 hours of order placement. For best results placing your order, we suggest you call us Toll free at 1-800-393-8933 (our local phone number is 504-393-8967).